Rosewill RX355-U - Manual (Page 2)

3.5" IDE to USB Ext. Enclosure With Removable 80mm fan User Manual
Please read this installation carefully before you use the product.
Precaution:
1. If it is a new HDD, needs to processing the disk partition
2. Win98SE and WinME do not recognize NTFS formatted drives,
so if you want to use your drive on those platforms, we
recommend you to use FAT32 instead.
3. Mac OS does not recognize NTFS formatted drives, to use your
device on both platforms, we recommend you using FAT32.
4. If you use Win2000 / WinXP/ Win Vista and FAT32, the biggest
single partition you can create will be 32GB. To create larger
partitions, you need to use the DOS command under Win98SE
or WinME or change to NTFS format.
5. Make sure the jumper settings of your hard drive is “master”.
System Requirement:
• Minimum Intel Processor II 350MHz, 64MB RAM
• Compatible with IBM PC, USB interface included，Windows
98/ME/2000/XP/Vista operate system.
• Minimum Apple G3 processor, 64MB RAM
• MAC computer system MAC OS V9.x or higher.
• Linux OS : please download kernel USB stack.
Available Interfaces
• USB 2.0 HIGH SPEED for IDE HDD
2