Rosewill RX355-U - Manual (Page 8)

3.5" IDE to USB Ext. Enclosure With Removable 80mm fan User Manual
8
5. After connect transfer cable and Power cord, the external HDD will
appear the relativity
6.Cooling fan cable installation:
Plug to DC fan cable into rear panel & cooling fan’s DC jack, and the
fan will be operating after the power on. (Please view image below)
Attention:
1. Only one interface at one time can be used
2. If this HDD is new one, please partition & format disk,
otherwise the system cannot detect HDD.
3. The HDD jumper should be set to “master”.
4. Make sure your PCI Host Card is installed correctly
5. If required, update your OS (win 2000 to SP4, Win XP to
SP1a)
6. Only one computer at one time can access the drive.