Ricoh PPC-154 - Manual (Page 15)

3 Chapter 1
1.2 Specifications
General
• Dimensions (W x H x D): 420 x 323 x 130.5 mm (16.54" x 12.72" x
5.12")
• Weight: 7 kg(15.4 lbs)
• Power supply:
AC model: 180 watts
Input voltage: 100~240 VAC , 4 A max. @ 50 ~ 60 Hz
Output voltage: [email protected], +5V@12A, +12V@10A
[email protected], +5VSB@2A
• Disk drive housing: Space for one 2.5" HDD, one 12.7 mm compact
CD-ROM drive, and one slim type 3.5" FDD
• Front panel:
IP65 protection (not for the model with SAW touchscreen)
Standard PC functions
• CPU: Supports Intel P4 and P4 Celeron up to 3.06 GHz. Also supports
Hyperthreading technology at 3.06GHz.
• BIOS: Award 4 MB Flash BIOS, supports Plug & Play, APCI
• Chipset: Intel 845GV / ICH4
• 2nd level cache: On-die 256 or 512 KB
• RAM: Two 184-pin DDR DIMM sockets up to 2GB DDR SDRAM
• PCI bus master IDE interface: Supports two connectors. Each con-
nector has one channel and supports two IDE devices. Each channel
supports PIO modes 0 ~ 4, DMA mode 0 ~ 2, and Ultra DMA 33/66/
100 simultaneously. The secondary connector is designated for the CD-
ROM drive. BIOS supports IDE CD-ROM boot-up
• Floppy disk drive: Supports up to two FDDs (720 KB / 1.44 MB). One
built-in FDD included inside FDD housing
• Parallel port: One parallel port, supports SPP/EPP/ECP parallel mode.
BIOS configurable to LPT1, LPT2, LPT3 or disabled
• Serial ports: Four serial ports with three RS-232 ports (COM1, 3, and
4), one RS-232/422/485 port (COM2). All ports are compatible with
16C550 UARTs
• Universal serial bus (USB) port: Supports up to four USB V2.0 ports