Pre l iminar y – Runco SP-60DHD User Manual

Page 43

Advertising
background image

Operation

PlasmaWall SP Series Owner’s Operating Manual

33

PRE

L

IMINAR

Y

5. Click the Advanced button and click the

Monitor tab on the dialog box. Set the
vertical frequency to 60Hz and click OK.

1. The native resolution of the SP-42DHD is 1024 x 768; the native

resolution of the SP-50DHD and SP-60DHD is 1365 x 768. Other
horizontal or vertical resolutions may be scaled upward or
downward to fit the display.

2. With most computers, you can get the best picture at

1024 x 768 @ 60Hz.

3. For best results when using a computer, set the input on the

DHD Controller to HD Pass Thru 1 or HD Pass Thru 2, depending
on which RGB/HD input you are using.

To prevent image retention (burn) on your display, ALWAYS use a
screen saver and set it to the shortest possible time.

Note

WARNING

Advertising
This manual is related to the following products: