Radio Shack HTX-200 - Manual (Page 22)

22
A QUICK LOOK AT THE DISPLAY
1. F: appears when the FUNC key is pressed.
2. TX: appears when the radio is transmitting.
3. BUSY: appears when the radio receives a signal.
4. CALL: appears when tone squelch is on and the radio receives a
matching tone.
5. : indicates the battery strength.
6. S-RF (Signal/RF Indicator): shows the level of an incoming signal.
When transmitting, shows the relative output signal strength.
7. BAT: appears when you turn on the radio — the signal strength
meter then indicates the battery strength.
8. : the stronger the signal, the more boxes appear.
Bars show remaining battery power when MO and PTT switch are
held down at the same time.
9. Alpha-Numeric Display: shows frequency and messages.
10. Memory Location: shows the memory channel in use.
11. MR (Memory Channel indicator): for use or for programming.
12. : paging tone active.
13. : key tone enabled.
14. : keypad control disabled to prevent accidentally
changing a setting.
15. PS: appears when power save is enabled.
16. TSQ: appears when Tone Squelch (CTCSS) is enabled.
17.
ã
: appears to indicate a positive repeater offset. – indicates a nega-
tive repeater offset.
1
2
3
4
5
6 7 8 9 10 11
12 13 14 15 16 17
19-1102RPO.fm Page 22 Friday, June 25, 1999 11:17 AM