Radio Shack HTX-200 - Manual (Page 33)

33
Setting A Memory Location to Always Skip
During Scanning
The HTX-200 is preset to include all memory locations (except
empty locations) during memory scanning . Follow these steps
to set the transceiver to have it always skip (or resume scanning)
a specific location during scanning.
1. Press MR . and the last used memory location appear.
2. Repeatedly press or to select the desired memory
location.
3. Press FUNC + MR . The selected memory location and
flash.
4. To set the HTX-200 to skip the memory location, press SC ,
then press or so SCSP ON (scan skip) appears.
To include the displayed location during scanning, press
or
so SCSP oF appears.
5. When you finish, press SC again, then press PTT to store the
setting.
MR
MR
19-1102RPO.fm Page 33 Friday, June 25, 1999 11:17 AM