Reducing noise – Radio Shack TRC-494 User Manual

Page 29

Advertising
background image

15

REDUCING NOISE

Because your CB is exceptionally
quiet, any noise you hear is probably
from an external source in your vehi-
cle —

the ignition, another radio,

spark plugs, and so forth.

You can determine the source of the
noise by turning off the engine and
operating the CB with the ignition set
to ACC. If most or all of the noise
goes away, the problem is in your ve-
hicle’s ignition or electrical system.
Here are a few hints to help you re-
duce or eliminate such noise:

• Do not route the DC power cord

next to the antenna wire.

• Be sure the antenna’s magnetic

base is securely attached to a
metallic surface. If you use an
antenna other than the mag-
netic-mount type, be sure that
the vehicle battery’s ground con-
nection is secure.

• Replace old ignition wires with

new, high-voltage, noise-sup-
pression ignition wires.

• Install noise suppressors on

your spark plugs or install spark
plugs that have built-in suppres-
sors.

• If problems persist, check your

alternator/generator and regula-
tor gauges. Noise from these
sources can be reduced or elimi-
nated using bypass capacitors
at the various voltage points.

Note: Your local Radio Shack store
has a wide selection of noise-sup-
pression equipment.

21-1589.fm Page 15 Thursday, August 5, 1999 10:10 AM

Advertising