Replacing the power cord’s fuse – Radio Shack TRC-494 User Manual

Page 34

Advertising
background image

17

REPLACING THE
POWER CORD’S FUSE

The TRC-494’s 2-amp fuse helps
protect your CB from power surges
and short circuits. If the fuse is blown,
replace it with a 2-amp, 250-volt,
fast-acting fuse (Cat. No. 270-1052).

Follow these steps to replace the
fuse.

1. Unplug the power cord from the

vehicle’s cigarette lighter and be
sure the CB is turned off.

2. To open the cigarette-lighter

plug and remove the fuse, turn
either end counterclockwise and
release it.

3. If the fuse is blown, replace it.

Caution: Make sure you replace
the fuse only with another fuse
of the same type and rating.

4. To close the cigarette-lighter

plug, put the open ends
together, then turn either end
clockwise.

21-1589.fm Page 17 Thursday, August 5, 1999 10:10 AM

Advertising