Roland RM-700 - Manual (Page 100)

101
Using the Practice Functions
9. After reading the message in the screen, touch <OK>.
The notation will appear and the accompaniment will start.
10. Play along with the accompaniment.
* If you stop playing before the end of the song, the song playback stops, and the screen showing the graded result appears.
When you finish playing, your performance will be scored.
11. Touch at the bottom of the screen to see how well you did.
• If you touch either “Ref.(reference)” or “You” and then press the [ (Play/Stop)] button, the performance of the selected part
will be played back.
• If you touch either “Ref.” or “You” and then turn the [Value] dial, you’ll be able to hear the notes of the selected part while checking
your results.
• You can touch a note to hear that note play.
• You can drag over the notation to play back the part for the region over which you dragged.
• You can play the keyboard to verify the key for a note. (Beginner course only)
• Press the [ (Prev)] button, the notation is switched, and going back one measure in the notation each time the button is
pressed.
• Press the [ (Next)] button, the notation is switched, and advancing one measure in the notation each time the button is
pressed.
<Beginner> <Challenge> / <Repertoire>
Pitch (Red)
1
2 3 4
1
Rhythm (Blue)
2
The pitch was incorrect.
Grayed Out
The proper note was not played.
The timing of the accent was off.
3
? (Green)
A note not in the notation was played.
4
RM-700_e.book 101 ページ ２００９年３月１８日 水曜日 午前１１時５分