Installation and wiring – Rosen Entertainment Systems Rosen R5505 User Manual

Page 14

Advertising
background image

14

R5505

2. Package Contents

Disc player unit

IR Remote control

4-pin Power Supply harness

RCA Audio Cable

Additional IR Receiver (with cable)

Installation Brackets and Assorted Hardware

Owner’s Manual / Installation Guide

Warranty Card

3. Installation Requirements

1 Use the enclosed screws for installation. Using other

screws can cause damage and void the warranty.

Chassis

Chassis

Damage

Max. 8 mm (M5 screw)

Installation and Wiring

1. Before Starting

Read these instructions and the following precautions
carefully.

WARNING!

Be sure to disconnect the battery (-)
terminal before starting. This is to
prevent short circuits during installation.

Precautions

This unit is exclusively for cars with a negative ground, 12V
power supply.

Do not open the case. There are no user-serviceable parts inside.
If you drop anything into the unit during installation, consult your
dealer or an authorized Rosen service center.

Use a soft, dry cloth to clean the case. Never use a rough cloth,
thinner, benzene, alcohol, or other solvent. For tough dirt, apply a
small amount of cold or warm water to a soft cloth and gently
wipe.

Advertising