Playing a vintage organ voice – Roland ATELIER 5100001499 User Manual
Page 32
30
Selecting and Playing Sounds
Turning on the Vintage Organ
1.
Press the Vintage Organ [On/Off] button so its indicator is
lit.
Each time you press the button, the indicator will alternate between ON (lit)
and OFF.
The Vintage organ screen appears.
fig.01-24.eps
The screen will show
value
for the harmonic bars.
When a harmonic bar is pulled out all the way (8), the volume is loudest.
When it is pushed in all the way (0), there will be no sound.
Modifying the Sound
1.
Press H-Bar Part [Upper] or [Lower] button to select a part
for which the harmonic bars are available.
2.
Slide the harmonic bars that you want to hear.
You can layer the sound of multiple harmonic bars.
Playing a Vintage Organ Voice
NOTE
Glide and sustain effects are
not applied to the Vintage
Organ voice.
The Vintage Organ screen will
be displayed for several
seconds, then it will close
automatically.
AT-75_e.book 30 ページ ２００８年８月２１日 木曜日 午前１０時９分