Using the leading bass function – Roland ATELIER 5100001499 User Manual

Page 52

Advertising
background image

50

Using the Rhythm Performance

When Automatic Accompaniment is used, and the Pedal [To Lower] button is
ON, the Pedal Bass voice will normally play the root note (p. 128) of the
chord you play on the Lower keyboard. If the Leading Bass function is
enabled, the lowest note of the chord you play on the Lower keyboard will
then be used as the bass note (the bottom note of the chord).
For this reason, the bass note will be sounded differently than normal when
you play an inverted chord (p. 128).

1.

Press the [Utility] button.

2.

Press the Menu [

] [

] buttons a number of times to

select “Leading Bass.”

3.

Press the Value [-] [+] buttons to switch the Leading Bass
“ON” or “OFF.”

To return to the basic screen, press the [Utility] button.

Using the Leading Bass Function

Setting

Description

ON

The Leading Bass function is ON.
The pedal bass tone will sound the lowest note of the chord
you play in the lower keyboard.

OFF

The Leading Bass function is OFF.

You can assign the Leading
Bass functions to either of the
foot switches located on each
side of the Expression Pedal (p.
70).

When the Leading Bass
function is on and the Chord
Intelligence function (p. 49) is
off, you can specify chords with
a combination of the lower
keyboard and pedalboard.

AT-75_e.book 50 ページ 2008年8月21日 木曜日 午前10時9分

Advertising
This manual is related to the following products: