Lkp-957 specifications – RTS Digital Matrix Intercom LKP-957 User Manual

Page 2

Advertising
background image

LKP-957 Specifications

Speaker/Headset Amplifier

Audio Input Level (1kHz)

Input (from matrix): +8 dBu
Input Adjustment Range (for rated output): -2 to +14 dBu

Audio Output Level (1kHz)

Loudspeaker Output: 3 Watts, 8Ω
Headset Output: 500 mW, 8Ω

Frequency Response: 200 Hz to 7kHz, ±1 dB
Total Harmonic Distortion (THD): Less than 0.25% at full output, 200 Hz to 10kHz
Signal to Noise Ratio: 90 dB
Audio Volume Control Range: 30 dB
Common Mode Rejection: 60 dB, 120 Hz

Power Supply

Power Entry Module: CSA/UL/CE approved, with on/off switch and safety interlock fuse holder (prevents fuse removal

while power cord is plugged in).
AC Primary

115 VAC 10%, 50/60 Hz
230 VAC 10%, (Factory Option)

AC Power Rating: 30 Va
AC Fuse Rating

115 VAC: 6/10 Amp
230 VAC: ¼ Amp

Mechanical

Dimensions: 1¾” (44 mm) high, 19” (483 mm) wide, 7” (178 mm) deep
Weight: 9 lbs (4 kg)

Connector Pin Configurations

Headset Connector Type: DB-9

Serial Communication

Data: Single Pair, half duplex RS-422 Serial 9,600; 76,800 DPS

Ordering Information

LKP-957

Listen-Only Keypanel

Catalog Number: 90007470117

This specifications information is preliminary and is subject to change without notification.

Brand names mentioned are the property of their respective companies.

Contact Information

Telex Communications, Inc.

12000 Portland Avenue South

Burnsville, Minnesota 55337

Telephone: 877·863·4169

Fax: 800·955·6831

Form Number: LIT000039000

Date: April, 2006

Advertising