Roberts Radio ColourStream - Manual (Page 16)

15
Connecting to your computer network - cont.
15. If your network is not found, it may be because the router is confi gured
not to broadcast the SSID. You should then scroll through the menu
and select Manual settings option in order to enter the network details
manually. This is described in 'Manual Network Confi guration', see
page 18.
If your network name is being broadcast, and it was not found, then
try re-scanning (press the Back button), and if necessary try moving
your radio to a location closer to your access point / router.
16. When the SSID for the wireless network you wish to connect to appears
on the screen, touch to select. If WiFi Protected Setup (WPS) was
indicated, you will see an additional menu at this point, otherwise
proceed to step 17.
Choose one of the WPS menu options as required for your router
(WPS may be via push button, or using an identifi cation number).
'Push Button' - the display prompts you to press the WPS button on
your router or access point and touch OK on screen. The two devices
should then connect with the encryption key sent automatically to the
radio.
'PIN' - the display shows an identifi cation number which you must
enter into your router using a web browser (refer to your router's user
documentation). Then touch OK on screen on the radio. The two
devices should then connect with the encryption key sent automatically
to the radio.
'Skip WPS' - if you wish to enter the encryption key yourself.
If you chose Push Button or PIN the screen will then show 'Connecting...'
and then 'Setup wizard completed'. Touch OK to exit the setup wizard
and then go to paragraph 20 on the next page.
17. If your network is confi gured without an encryption key, the screen
should say 'Connecting...', and then 'Setup wizard completed'. Touch
OK to exit the setup wizard and enter Standby mode.
If this is the case then you have successfully connected your radio to
your network, so please go to paragraph 20 on the next page.
18. If the screen displays 'Network Key:', it is because the network is
using one of the encryption systems: Wired Equivalent Privacy (WEP)
or WiFi Protected Access (WPA). You will need to enter the correct
WEP or WPA key into the radio to allow it to communicate with your
wireless network. If you do not have the WEP or WPA key, then you
should obtain it from the person who set up your network. Some
wireless routers may come with an encryption key already set up by
the supplier, in which case you should refer to the documentation
provided with it. WPA is used here to also include WPA2.
Setup Wizard
00:00
Paul’s network <WPS>
<Rescan>
<Wired Network>
Manual settings
Network Wizard
Network key:
Setup Wizard
123
123 - JONES