Roberts Radio ColourStream - Manual (Page 80)

79
Brightness control
The brightness of the display can be adjusted for when the radio is in
Standby and for when it is in use. If you use the unit in the bedroom, you
may prefer a lower standby brightness level than the standard setting.
From the home menu press the Settings mode button.The
main settings menu will be displayed.
Scroll through the menu and select Miscellaneous Settings and select
Display backlight.
To adjust the display brightness when the radio is switched on, adjust
'Power on backlight'.
To adjust the display brightness when the radio is in standby, adjust
'Standby backlight'.
Settings
Either use the Left or Right arrows or touch the slider
to adjust the backlight level. The display will change as
you adjust the levels.
Settings
15:05 26 Jun 2010
Check for Updates
Display backlight
Software version
Factory reset
Miscellaneous Settings