Remington 489 - Manual (Page 22)

Two by fours
Furring strips
Electrical
junction boxes
Conduit clips
Shelf brackets
1/4" Plywood or
pegboard
For fastening this
20
Application Chart
482-81a
2 1/2"
2 1/2"
2"
1 1/2"
1 1/2"
1 1/2"
2"
1"
1"
3/4"
to this
Concrete
Cement block
Steel
Concrete
Cement block
Cinder block
Steel
Concrete
Cement block
Steel (3/16" to 3/8" thick)
Concrete
Cinder block
Cement block
Steel (3/16" to 3/8" thick)
Concrete
Cement block
Cinder block 1"
1"
1"
Concrete
Cement block
Steel 1 1/4"
1 1/4"
1"
Green
Green
Yellow
Green
Gray
Brown
Yellow
Green
Brown
Green
Green
Brown
Gray
Green
Green
Yellow
powder load
color
power fastener
length
Powder load and power fastener application information.
Green
Brown
Gray
Green
1"
1"
1"
3/4"
IMPORTANT
• Recommended for use with Remington powder loads and power fasteners.
• Do not use power fasteners longer than 2 1/2".
• If power fastener goes below the top surface of the board, use penetrating control
disc (see illustration below).
• Always wear approved eye and ear protection.
482-90
* Use power fastener with penetration control disc, part number 015549.
Powder load listings are recommendations only. If you are in doubt, try a test
fastening using the next lightest powder load.
Power fasteners and powder loads are available in poly packages of 10, blister
packs of 25 and cartons of 100.