RCA Pro884HB - Manual (Page 30)

28
1. Attach a power supply to the
camcorder. Press and hold the small
button on the CAM/OFF/VCR switch
while you slide it in CAM.
2. If the date and time display does not
appear in the viewfinder, press
DATE/TITLE.
3. A flashing cursor lets you know which
part of the display you are setting.
Press the F.F or REW button
repeatedly until the correct month
appears.
Date and Time Display
Set the Date and Time
The clock cell must be installed as shown on page 30 before you set the clock.
12:00AM
1/1/1995
Hours
Minutes
AM or PM
Month
Day
Year
4. Then press STOP. The flashing cursor
will move to the next part of the
display.
5. Repeat steps 3 and 4 until you have
entered the correct month, day, year,
hour, minute, and AM or PM.
6. After you select AM or PM, press
DATE/TITLE to remove the flashing
cursor from the viewfinder and start
the camcorder’s internal clock.
Correct the Date or Time
To correct the date or time after the clock
has been started, simultaneously press
DATE/TITLE and STOP. Then correct
the date or time using REW, F.F,
and STOP.
DC IN
6V
OPEN
T
W INST. ZOOM
FOCUS
DATE/TITLE
DISPLAY
PLAY
F.F. EDIT SEARCH
STOP
REW
F
N
16X9
FADE EIS
PLAY
Button
STOP Button
CAM/OFF/VCR Switch
DATE/TITLE Button
REW Button
F.F Button