RCA Pro884HB - Manual (Page 46)

44
3 Attach the plug on the other end of the
input cable to the audio/video in/out
connector located behind the small
cover on the side of the camcorder.
(Match the tabs on the plug with the
notches on the camcorder connector.
Do not force the plug.)
Audio/Video Dubbing
A/V (audio/video) DUB on the remote lets you record new audio and video from
another VCR or camcorder to a previously recorded tape in the camcorder. You
will need an optional VAA008 audio/video input cable shown on page 63.
Notes: The source for audio and video when dubbing is the signal coming through the
audio and video plugs of the audio/video input cable.
If you connect only the video plug of the audio/video input cable to the VCR, you will
have no sound on the dubbed portion.
If you connect only the audio plugs of the audio/video input cable to the VCR, the
camcorder will not dub.
Installation
1 Attach the input cable’s white plug to
the L AUDIO OUT jack and the red
plug to the R AUDIO OUT jack of the
VCR.
Note: If your VCR only has one AUDIO
OUT jack, you may need a Y-adapter.
2 Attach the input cable’s yellow plug to
the VIDEO OUT jack on the VCR.
DC IN
6V
T
W INST. ZOOM
FOCUS
DATE/TITLE
DISPLAY
PLAY
F.F. EDIT SEARCH
STOP
REW
F
N
AUDIO
OUT
VIDEO
OUT
Back of
Mono VCR
White and Red Audio Plugs
Yellow Video Plug
Optional VAA008
Audio/Video
Input Cable
AUDIO
OUT
VIDEO
OUT
L
R
Yellow Video Plug
White and Red
Audio Plugs
Y-Adapter
(Such as AH25)
Optional VAA008
Audio/Video
Input Cable
or
Back of
Stereo VCR
1
1
2
2 3
3
Audio/Video
Connector
(Behind Small
Cover)