Raymarine ST7001 - Manual (Page 18)

12 ST7001+ Smartpilot Controller Operating Guide
3. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
• if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example: auto selects Auto mode,
standby selects Standby mode)
Notes: (1) You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
(2) When you switch off the unit you lose any changes you have
made to the lighting level.
How do I adjust the contrast?
To set the contrast level for the ST7001 display:
1. With the autopilot in Standby mode, press the disp key for one second to
access the LAMP screen.
2. Press the disp key for one second again, to display the CONTRAST screen.
3. Use the up and down arrow keys to set the required contrast level (from
1 to 15).
4. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
Note: if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example:
auto selects Auto mode, standby
selects Standby mode)
D5517-2
1 second