Can i display waypoint names – Raymarine ST7001 User Manual
Page 28
22
ST7001+ Smartpilot Controller Operating Guide
Notes: (1) If the SmartPilot system cannot obtain the required informa-
tion, the data page will show dashes instead of a value.
(2) The direction-to-steer arrows relate to the data page
information.
(3) Most data pages show repeated data so you cannot adjust
them: the exceptions are the
RESPONSE and RUDDER GAIN data
pages, which you can adjust using the
or up/down arrow keys
Can I display Waypoint names?
If the waypoints have been given names, the ST7001 will display them on the
Cross Track Error (XTE), Bearing To Waypoint (BTW) and Distance To
Waypoint (DTW) data pages:
•
waypoint names of five characters or less are displayed together with the
page name (as shown by screen A below)
•
waypoint names of more than five characters alternate with the page
name (as shown by screen B below)
•
if the waypoint name has more than nine characters, the display only
shows the first nine characters
D5456-2
Default data pages
Autopilot mode
Data page 1
Data page 3
Data page 4
Data page 2
Press for 1 sec to
return to previous
data page