Reliance Water Heaters 606 Series - Manual (Page 5)

5
TYPICAL INST TYPICAL INST TYPICAL INST TYPICAL INST TYPICAL INSTALLA ALLA ALLA ALLA ALLATION TION TION TION TION
GET TO KNOW YOUR WATER HEATER - GAS MODELS
* INSTALL IN ACCORDANCE WITH
LOCAL CODES.
* DRIP LEG AS REQUIRED BY
LOCAL CODES.
* ALL PIPING MATERIALS TO BE
SUPPLIED BY CUSTOMERS.
FIGURE 1.
(T) THERMOSTAT
A VENT PIPE
B DRAFT HOOD
C ANODE
D HOT WATER OUTLET
E OUTLET
F INSULATION
G GAS SUPPLY
H MANUAL GAS SHUT-OFF VALVE
I GROUND JOINT UNION
J DRIP LEG (SEDIMENT TRAP)
K INNER DOOR
L OUTER DOOR
M UNION
N INLET WATER SHUT-OFF VALVE
O COLD WATER INLET
P INLET DIP TUBE
Q TEMPERATURE-PRESSURE
RELIEF VALVE
R RATING PLATE
S FLUE BAFFLE(S)
T THERMOSTAT
U DRAIN VALVE
V PILOT AND MAIN BURNER
W FLUE
X DRAIN PAN
(V) PILOT & MAIN BURNER - NATURAL GAS
MAIN
BURNER
THERMOCOUPLE
PILOT
BURNER
(V) PILOT & MAIN BURNER - PROPANE GAS
** CLOSED WATER SYSTEMS ARE THOSE
WITH BACK FLOW PREVENTION DEVICES
INSTALLED IN THE INLET WATER SERVICE LINE.