Reliance Water Heaters 606 Series - Manual (Page 8)

8
MA MA MA MA MATERIALS AND BASIC T TERIALS AND BASIC T TERIALS AND BASIC T TERIALS AND BASIC T TERIALS AND BASIC TOOLS NEEDED OOLS NEEDED OOLS NEEDED OOLS NEEDED OOLS NEEDED
DECIDING ON THE TYPE OF INSTALLATION
There are typically two different types of installations. The
installation section of this manual has been broken into these
two methods:
Look at your old water heater installation to determine which
type of installation you have. After finding out what type of
installation you have, look at the options:
Section A
Galvanized Piping
The original piping is galvanized pipe.
Section B
Copper (Sweat) Piping
The original piping is copper sweat and you are going to
reconnect with sweat joints.
HACKSAW
PIPE WRENCHES
CHECK YOUR TOOLS
PIPE
DOPE STICK
FLEXIBLE GAS
CONNECTOR
PART NO. 9000068
CHECK YOUR TOOLS
GARDEN
HOSE
TUBING CUTTER
ROLL OF
EMERY CLOTH
3/4” WIRE BRUSH
1/2” WIRE BRUSH
SOLDER FLUX
PIPE WRENCHES
MAAP GAS
TORCH
ROLL 95-5 OR
EQUIVALENT
SOFT SOLDER
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS)
2 FEMALE AND 1 MALE
THREADED TO SWEAT
CONNECTORS
PIPE DOPE STICK
(FOR WATER AND GAS
CONNECTIONS)
2 - SWEAT
COUPLINGS
LENGTH OF HARD COPPER PIPING
(SIZE OF COPPER PIPE AND SWEAT FITTINGS MUST
BE THE SAME SIZE AS THE ORIGINAL PIPING.)
FLEXIBLE GAS
CONNECTOR
PART NO. 9000068
ROLL OF
EMERY CLOTH
PHILLIPS HEAD SCREWDRIVER
SLOT-HEAD SCREWDRIVER
DRILL
DRILL
PHILLIPS HEAD SCREWDRIVER
SLOT-HEAD SCREWDRIVER
GARDEN
HOSE
Individual Parts
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS)