Ad di ti on al i nf o – Radio Shack 43-326 User Manual

Page 40

Advertising
background image

40

Ad

di

ti

on

al

I

nf

o

for 15 seconds, then plug in the power adapter and re-install the battery.

Place the handset in the telephone base and allow up to one minute for

the handset and telephone base to synchronize.

• Other electronic products might prevent your handset and telephone

base from communicating with each other. Install your telephone base

as far away from these electronic devices as possible: wireless routers,

radios, cellular telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and other cordless telephones.

An envelope icon shows on the display or the VOICEMAIL light is

flashing and I don’t know why.

• If <envelope icon> appears on the display or the VOICEMAIL light

flashes, then your telephone has received a signal from your telephone

service provider that you have a voicemail message waiting for you to

retrieve from your telephone service provider. Contact your telephone

service provider for more information on how to access your voicemail.

Common cures for electronic equipment.
If the telephone is not responding normally, put the cordless handset in the

telephone base. If it does not respond, try the following (in the order listed):

• Disconnect the power to the telephone base.
• Disconnect the battery on the cordless handset.
• Wait a few minutes before connecting power to the telephone base.
• Re-install the battery and place the cordless handset in the telephone

base or charger.

• Wait for the cordless handset to synchronize with the telephone base.

Allow up to one minute for this to take place.

Advertising