Battery installation and charging, Te le ph on e se tu p – Radio Shack 43-326 User Manual

Page 6

Advertising
background image

6

Te

le

ph

on

e

Se

tu

p

Battery Installation and Charging

Install the battery as shown below. For best performance, charge the

handset for at least 16 hours before use. When not in use, place the handset

in the telephone base or charger. See page 32 for battery operating times.

1. If the battery compartment cover is on the handset, press the

indentation and slide the cover to remove.

2. Plug the battery securely into the plug inside the handset battery

compartment, matching the color-coded label.

3. Place the battery with the label THIS SIDE UP facing up and the wires

inside the battery compartment.

4. Align the cover flat against the battery

compartment, then slide it towards the center

of the handset until it clicks into place.

5. Charge the handset by placing it in the

telephone base or charger. The CHARGE

light is on when the handset charges.

Match with color-coded label

Red wire

Black wire

Advertising