RCA CC632 - Manual (Page 19)

17
BATTERY
Video Cassettes
Inserting and Removing Cassettes
Caution: Insert
cassette with
safety tab facing
up and tape
windows facing
out. Cassette
should slide
easily into the
compartment.
Gently push the
cassette down
until it locks
into place.
Press Here to Close
Tape Windows
STOP/EJECT
Safety Tab
Cassette Care and Storage
Follow these directions for continued high-quality performance from your cassettes.
• Keep cassettes away from strong
magnetic fields, such as electric motors
and other devices.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape may jam or damage the camcorder.
• When you are finished recording, break
off the safety tab on the cassette to
prevent accidental erasure.
• Do not leave your camcorder or
cassettes in a car or outdoors for an
extended period. Excessive heat or
cold may damage them.
• When you are finished with a cassette,
rewind it and remove it from the
camcorder.
• Label and store cassettes vertically in
their protective cases at normal room
temperatures. Excessive heat or cold
may damage your cassettes.
• Keep dust from entering the cassette
compartment. All dust is abrasive and
will cause excessive wear on the tape
and the camcorder’s recording or
playback heads.
1. Attach a power source to the
camcorder (either a charged battery or
adapter/charger).
2. Press STOP/EJECT on the top of the
camcorder to open cassette door.
3. Insert or remove the cassette from the
cassette compartment.
4. Gently close the cassette door with
your hand.