ResMed HumidAire 2i - Manual (Page 2)

Clinical Use Only
2
ResMed HumidAire 2i – Disinfection Guide
This Disinfection Guide is intended for multipatient use of the HumidAire 2i in a sleep lab, clinic or hospital. If
you use the water chamber as a single user in the home, refer to the User Guide for cleaning instructions.
The following are the recommended and validated procedures for cleaning and disinfection of the water
chamber. We advise that each healthcare facility consult its own procedures before carrying out the following
instructions.
WARNINGS and CAUTIONS
• ResMed cannot give any assurance that deviations from the procedures listed in this guide, and their
effect on the performance of the product, will be acceptable.
• When using detergents or disinfectants always follow the manufacturer’s instructions.
Note: The HumidAire 2i is available in both a clear polycarbonate (PC) version as well as a smoky gray
polysulphone (UDEL) version. The following cleaning methods apply only to the clear polycarbonate (PC)
version.
Clear polycarbonate (PC) version Smoky gray polysulphone (UDEL) version