Recoton/Advent EC Series - Manual (Page 13)

EC Series EN-9
4.7 Storing Piece Weight into Memory
There are 10 memory locations (0 to 9 numeric keys) available to store APW values.
After determining the piece weight
(refer to Sec. 4.5 or 4.6), long-press
APW for approx. 2 seconds. “StorE”
will flash on the display.
Press any one of the numeric keys
to store the piece weight data in this
selected location.
0.0 .
0.0 .
Weight g
0.0 .
S S S S St t t t torE orE orE orE orE
40.0 .
Piece Weight g/pc
40. .
0. .
0. .
Count pcs
0. .
Press the numeric key (ex. location 5)
with the stored piece weight data (ex.
40 g/pc), then press APW two times.
The stored data will be uploaded and
displayed.
4.8 Recalling Piece Weight from Memory
Place the item to be weighed/counted
on the pan (ex. 300g with APW of
60g). Press M+. “Add”, then the
accumulation event is displayed
momentarily before reverting to nor-
mal weighing mode.
NOTE: Weight display must return to
zero before the next accumulation
can register.
NOTE: Accumulation data is not retained when the unit is turned off.
NOTE: Stored APW values are retained when the unit is turned off.
4.9 Accumulation: Weight and Quantity
Accumulation is indicated by the annunciator.
0.0 .
Weight g
0.0 .
5. .
Memory Location
Piece Weight g/pc
0. .
0 . 0 . 0 . 0 . 0 .
.
Count pcs
0. .
0.0 . 40.000 0. .
To recall Total Accumulation data,
press M+ with no weight on the pan.
The data is displayed momentarily
before reverting to normal weighing
mode.
To clear the Total Accumulation data,
press C while the data is displayed.
------ .
Weight g
300.0 .
Add
Piece Weight g/pc
60.0000
------ .
Count pcs
5. .
Total Accumulation
Times
300.0 . 60.000 . 5. .
Total Accumulated
Count
Total Accumulated
Weight
300.0 . =01= 5. .
1500.0 . 60.000 . 25. .
Weight g
1500.0 .
Total Accumulation
Times
Piece Weight g/pc
=05=
Count pcs
25. .
Total Accumulated
Count
Total Accumulated
Weight
3 EC-textEN.pmd 8/9/2005, 1:41 PM 9