RCA DRC6272 - Manual (Page 16)

15
EN
Repeat Playback
You can play a specific title or chapter repeatedly.
(Chapter repeat, title repeat, A-B repeat)
Repeating a chapter (DVD)
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT DISC
button until the “ ” indicator
displays on the screen. The current chapter is
played repeatedly.
Repeating a title
You can play the same title repeatedly.
2. While the disc is playing, press the REPEAT
DISC button until the “ ” indicator
displays on the screen. The current title is
played repeatedly.
To resume normal playback
3. While the disc is playing, press the REPEAT DISC
button until the “ ” indicator displays
on the screen.
You can play a single track or an entire disc
repeatedly.
Repeating a single track (CD)
You can play the same track repeatedly.
1. While the disc is playing, press the REPEAT
DISC button until the “ ” indicator
displays on the screen. The current track is
played repeatedly.
Repeating an entire disc
2. While the disc is playing, press the REPEAT
DISC button until the “ ” indicator
displays on the screen. The entire disc is played
repeatedly.
To resume normal playback
3. Press the REPEAT DISC button until the “
” indicator displays on the screen.
Repeating a specific section (DVD/CD)
You can play a specific section repeatedly.
1. While the disc is playing, press the REPEAT A-B
button at the beginning of the section (
is displayed) you want to play repeatedly.
2. Press the REPEAT A-B button again at the end
of the section ( is displayed) you want
to play repeatedly.
3. The unit will immediately begin replaying your
selection.
To resume normal playback
4. While the disc is playing, press the REPEAT A-B
button until the “ ” indicator displays
on the screen.
Note:
• A-B repeat can only be used
within the same title. If the start
and end of the section to be repeated are
in different titles, A-B repeat is cancelled.
• The A-B repeat function does not operate
in scenes where different camera angles
are recorded.
DVD Programmable Playback
Programmable memory
You can play the titles/chapters on the current
disc in the order you determine.
1. When a DVD is stopped, press the MEMORY
button, the following display appears.
2. Select the items in the order you want by
pressing the number buttons. Each time you
press the Cursor buttons ( , , , ), the space
is highlighted, Highlight where you want to enter,
then press the corresponding number buttons.
3. Press the Cursor
buttons ( , ,
, ) to move the
highlighted bar
to Play Memory,
then press the
ENTER button.
The DVD player
starts memory playback.
4. To resume normal playback from memory
playback.
a) Press the MEMORY button in stop mode.
b) Press the Cursor buttons ( , , , ) to move
the highlighted bar to “Clear All”, then press
the ENTER button. All the input programs will
be cleared.
c) Press the PLAY button to resume normal
playback.
Note:
• If the title or chapter numbers
you entered is not permitted by the DVD,
after you press the ENTER button, it will
restore to - - -. You should re-enter correct
numbers.
• Some discs may not permit memory
playback operation.
• If you select repeat during memory
playback, the DVD player repeats the
current memory playback.
• If you press the MEMORY button while
the display appears on the TV screen, the
display disappears.
• The programmed selections will be cleared
when you open the disc tray or turn off the
DVD player.