RCA DRC6272 - Manual (Page 17)

16
EN
When play CD / Picture file, you can modify the
Play Modes through the Toolkit which appears on
the right of below picture on the screen. Press the
or button to navigate between the windows
and the or button to select files/tracks or play
mode items. Then press the ENTER button.
1. Press the Cursor buttons ( , , , ) to select
“Edit mode” then press the ENTER button.
2. Use the Cursor buttons ( , , , ) to select
tracks/files shown on the left hand side of the
window. Press the ENTER button to confirm the
selected tracks/files. “ ” will appear in front of
the selected tracks/files.
3. Select “Add to program”, then press the ENTER
button. “ ” will disappear from the screen. It
means that the tracks/files you have selected are
added into the “Program view”.
4. Select “Program view” to view programmed
files. To add more files by “Browser view” follow
above steps.
5. Press the PLAY button to start program
playback.
The Toolkit has the following play mode items:
• Repeat (Off / Single / All):
Off: Resumes normal playback.
Single: Repeats the current track/file.
All: Repeats all files on the current folder or
Play Modes for CD or Picture File
• Mode (Normal / Shuffle / Music intro):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Music intro (for Audio CD only): Only
playbacks the first 10 seconds of all the tracks
on the current folder / disc.
• Edit mode: Program operation works only
when “Edit mode” is selected.
• Program view: To view tracks/files in the
“Program view” list. It is disabled when the
“Program view” list is empty.
• Add to program: Add files/tracks to the
“Program view” list. It is disabled if the “Edit
mode” is not selected.
• Browser view: To view files/tracks in the
original view list.
• Clear program: Delete the files/tracks in the
“Program view” list.
Select a file/track or more you want to delete
in complete stop mode (press the STOP
button twice).
“ ” will appear beside the deleted file/track. Select
“Clear program” and then press the ENTER button.
It is disabled if the “ Edit mode” is not selected.
all tracks on the disc.
Note:
• The program will be deleted
if the disc door is opened, or
selected files are deleted by selecting “Clear
program”.
Playing JPEG Files
This unit can Picture JPEG files recorded on CD-R
and CD-RW discs.
Playing a JPEG file disc
1. Press the button and hold the front panel
to open the disc door.
2. Hold the disc by its edge and gently push it
onto the spindle, with the label side facing
the front, until you hear a “click”.
3. Push the disc door gently to close it. A list of
folders/files will appear on the screen.
Note:
• You can press the PAUSE
button to interrupt playback,
and press the PLAY button to resume
playback.
• You can press the STOP button to quit
playback.
• You can press the PREV or NEXT
button to change the picture.
• Press the ANGLE button on the remote control
to rotate the picture orientation by 90°.
4. The unit will take a short while to load the
disc and automatically start playback. If the
unit does not automatically start playing
the disc, press the or button to select
your desired file, then press the ENTER, the
selected picture will appear at the lower
right corner. Press the PLAY button to start
playback. Press the STOP button to display
a folder list.