Ryobi P301 - Manual (Page 8)

8
FEATURES
PRODUCT SPECIFICATIONS
Motor ..................................................................18 Volt DC
Switch ................................................... Single Shot Trigger
Magazine Capacity ............................................... 84 staple
Staple Speed .................................................40 shots/min. Staple Size ..........................................3/8 in. Crown Width
1/4, 5/16, 3/8, 1/2, 17/32, 9/16 in. length
Charger Input ................................... 120 V, 60 Hz, AC only
Charge Rate .............................................................1 Hour
SWITCH
TRIGGER
ACTIVATION
FOOT
DEPTH ADJUSTMENT
KNOB
Fig. 1
KNOW YOUR STAPLER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ACTIVATION FOOT
The tool will drive a staple each time the trigger is depressed,
as long as the activation foot is depressed.
DEPTH ADJUSTMENT KNOB
Use the depth adjustment knob to control the depth of the
staple.
LOW STAPLE VIEW WINDOW
The view window shows how many staples remain in the
tool.
LOW STAPLE VIEW
WINDOW