Roland EM-55 - Manual (Page 33)

EM-55 OR Owner’s Manual
33
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Chorus
(1) Press and hold the [FUNCTION] button,
while pressing the BANK/NUMBER [6]
button.
This selects the “CHR” function:
(2) Use the [TEMPO/DATA] dial to select one
of the available types. Select “OFF” if you
do not need the Chorus effect.
We could try to describe them, but you will
get a better idea by selecting one after the
other. Flanger or FB Chorus can be inter-
esting for guitar Tones.
Again, there are two echo effects: Short
Delay
(“S-Delay”) and Short Delay with
Feedback (“SDelayFB”). They are, however,
much shorter than those available for the
Reverb effect processor.
(3) Press [SONG], [STYLE], [TONES], [USER
PROGRAM], or [MUSIC ASSISTANT] to
leave this page.
Note: The Chorus Send Level of the Upper 1/2 and
Lower parts is set to “0”, which means that these
parts are not automatically processed by the Chorus
effect. See the Chr UP1, UP2, and LWR parameters
on p. 47 and following for how to set them.
Balance
The BALANCE [ √ACCOMP] and [KEYBOARD®] buttons allow you to change the volume balance between
the Arranger (or Song) parts and the Keyboard parts (the ones you can play yourself).
(1) Press BALANCE [ √ACCOMP] if the
Arranger (or Song parts) are too soft.
(2) Press BALANCE [KEYBOARD
®] if you
think your solo playing should be louder.
Not all Keyboard parts are available at all
times.
Note: See p. 45 for setting the volume of individual
parts.
FUNCTION
6
Chorus 3 VALUE
Off
Chorus 1
Chorus 2 Chorus 3
Chorus 4
FB Chorus Flanger
S-Delay
SDelayFb
EM-55OR_UK Page 33 Wednesday, July 10, 2002 3:32 PM