Reliable Data-Logger DL-04 - Manual (Page 16)

Reliable Scale Corporation
Model DL-04 DATA-LOGGER
User Manual Page 16 of 38 Rev. 1.70
4.6 Print Data
Data saved in the
DL-04 must be transferred to a host computer for
historical storage and analysis. Connect the DL-04 to the computer with
the proper cables & hardware. Be sure your computer is ready to
receive the records. The default serial port configuration for the
DL-04 is
9600 baud, 8 data bits, no parity, 1 stop bit. A standard terminal
program such as Procomm or HyperTerminal can be used for this
procedure (see your terminal program manual for details).
Transferring jobs to computer does not remove them from the
DL-04 ’s
memory. Records are stored permanently in memory and can only be
removed by using the Delete Data option (see section 4.3, on page 11).
Data transfer can be done as many times as desired before deletion.
1. From the Main Menu, select Print Data.
MAIN MENU
6 Plot Chart
5 Print Data
Select # more: T
If there is more than one job in memory,
the user will be prompted for the job
number.
PRINT DATA
Job TO Print? (3)
„
F4 : Quit
2. Enter job number to print.
3. During data transfer, the number of the
entry currently being printed is
displayed.
PRINT DATA
Printing record: 457
F4 : Quit