Connecting to a dolby digital amplifier, Figure 3-7 . digital audio connection, 7. digital audio connection – Runco CRYSTAL CX-OPAL47 User Manual
Page 34: Pre l iminar y
Advertising
20
CX-47HD/CX-OPAL47/CX-65HD Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting to a Dolby
Digital Amplifier
If your home theater has a Dolby Digital amplifier or receiver, connect the SPDIF digital
audio output from the Crystal Series LCD to the digital audio input of the amplifier/receiver
as shown in Figure 3-7.
Figure 3-7. Digital Audio Connection
➤
The audio output level is fixed. (The volume and mute controls affect
only the speaker outputs.)
Note
r Out
HDMI 2
HDMI 1
SPDIF Out
IR
In
R
Digital Audio Cable,
Optical
Dolby Digital
Amplifier
Advertising
This manual is related to the following products: