Installing the acu – Raymarine 81285_1 User Manual

Page 10

Advertising
background image

8 Raymarine Satellite TV Systems

Installing the ACU

The ACU should be installed below decks, in a position that is:

dry.

well ventilated.

easily accessible.

near to the Master HD receiver as some manual operation
will be required if programming is on DirecTV satellites 101,
110, 119.

The ACU should be installed using the two fixing brackets
supplied. These brackets can be placed on the sides of the unit
to provide a top or bottom fix.

To install the ACU:

1. Select the installation site, ensuring that the proposed site

meets the criteria described above.

2. Using the screws supplied fix the mounting brackets to the

sides of the ACU.

3. Place the ACU in the position where it is going to be

installed.

4. Connect the cables to the rear of the ACU.
5. Using a pencil, mark the 4 hole positions (2 each side) for

securing the mounting brackets.

6. Using a suitable drill bit, drill the 4 holes in the required

position.

7. Using the screws supplied, secure the ACU into position.

D7953_1

Advertising