Radio Shack Light and Learn Remote - Manual (Page 19)

19 Operation
2. Hold down P until the red light blinks twice.
3. Press 9 9 3 . The red light blinks twice.
4. Press VOL– . The red light blinks four times.
To control the volume through your auxiliary device,
press
CD before using the volume controls.
Volume Unlock on an Auxiliary Device
1. Press AUX .
2. Hold down P until the red light blinks twice.
3. Press 9 9 3 . The red light blinks twice.
4. Press VOL– . The red light blinks four times.
To control the volume through your auxiliary device,
press
AUX before using the volume controls.
Resetting Volume Lock to the Original
Settings
1. Hold down P until the red light blinks twice.
2. Press 9 9 3 . The red light blinks twice.
3. Press TV . The red light blinks twice.
USING THE SLEEP TIMER
On a TV or CBL/SAT device, the Sleep Timer lets you
program the chosen device to turn off automatically.
You can set the Sleep Timer in 15-minute increments,
for up to 60 minutes.
Setting the Sleep Timer
1. Select TV or CBL/SAT .
2. Press SLEEP once to activate the Sleep Timer for
15 minutes. The red light blinks once, then contin-
ues to blink once about every 24 seconds, to indi-
cate the Sleep Timer is activated.