Raritan Engineering 1700 Series - Manual (Page 6)

6
3/4"(1.9cm)
Marine Plywood
24"
(61cm)
Cut along this line to
make 2 side pieces
20 3/4"
(52.7cm)
20 3/4"
(52.7cm)
8"
(20.3cm)
1" (2.5cm)
Full
18 3/4"
(47.6cm)
Fig. #3b
REMOVABLE PLUG
IN LID OF HEATER
3/4"(1.9cm) THICK TOP OF
FRAME
(MARINE PLYWOOD)
3/4" 10 UNC NUT WELDED
TO TANK FOAM INSULATION
TOP OF TANK
PLASTIC HEATER LID
Fig. #3a SUPPORT BRACKET OPTION FOR 12 and 20 GALLON WATER HEATER
9"
(22.9 cm)
3/4" 10 UNC STUD
3/4" 10 UNC NUT
3/4" FLAT WASHER
13/16"
(22mm)
HOLE IN
CENTER
3/4" 10 UNC STUD,
NUT AND FLAT
WASHER
SEE FIG. #3b
18 3/4"
(47.6cm)
3/4" FLAT WASHER
(as needed)
1" (2.5cm)
Full 1" (2.5cm)
Full
1"
(2.5cm)
Full
1" (2.5cm)
Full
Materials: 1" (2.5cm) full cut wood for (4) sides of frame; top is made of 3/4" (1.9cm) marine plywood.
All parts are screwed together.
PART NUMBERS
WH1A-S* Heating Element 120V (screw-in) with
gasket
WH1B-S* Heating Element 240V (screw-in) with
gasket
WH1D-S Heating Element, 4500 watt/240V
(screw-in) with Gasket
WH1GS Heating Element Gasket
WH3* Temperature and Pressure Relief Valve
WH16* Thermostat
1790610 Anode 6 gallon
1790010 Anode 12 and 20 gallon
* Parts may be ordered at www.raritaneng.com.
SERVICE AND REPLACEMENT PARTS
Replacement parts may be ordered through your
local Raritan dealer or directly from the factory.
Some parts may be ordered at www.raritaneng.com.
When ordering please state part number, description
and quantity required. With some parts you may
need to know voltage. Questions or problems may
be referred to Raritan's Technical Support. Our
Technical Support also operates a factory repair and
overhaul shop at both branches, call for details.
6