Roland KF-7 - Manual (Page 147)

147
Chapter 8 Various Settings
Chapter 8
■ Settings for the Countdown
→ For detailed information about count-in, refer to “Having a
Count Sound Play at the End of the Intro (Countdown)” (p.
56).
fig.d-funcmenu2.eps_50
Other Settings
You can change the tuning, the language shown on the
display, and other settings to make the KF-7 easier to use.
■ Procedure
1.
Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2.
Touch <Functions>.
When you touch <Functions> on the Basic screen, the
first page displayed shows the parameters for the
Automatic Accompaniment settings (p. 141).
When you touch <Functions> on the Piano screen, the
parameters for the piano performance settings continue
into the second page (p. 138).
A “Functions screen” like the following appears.
fig.d-funcmenu2.eps_50
Parame-
ter Name
Value Description
Switch ON, OFF
Countdown will be added
(ON) or not (OFF).
Sound
Voice (JPN),
Voice (ENG) Specify the countdown
sound.
Part
Both Track
Lower Track
Upper Track
Part 1–16
Specify the track or part
that will determine the be-
ginning of the perfor-
mance when added a
countdown.
Parameter Description
Master Tune Sets the KF-7’s standard pitch (p. 148).
Language
Selects the language used in the
display (p. 148).
Opening
Message Sets the message that appears when
the power is turned on (p. 148).
MIDI Ensemble Refer to p. 155.
User Image
Display Selects the image data and display
used (p. 149).
MIDI Settings Refer to p. 155.
Program
Change
Refer to p. 155.
Beat Indicator
Remains the beat indicator off at all
times (p. 150).
MIDI Sync Refer to p. 154.
Memory Backup
Stores the edited settings and other
data to the KF-7 (p. 150).
Factory Reset
Restores the content stored with
Memory Backup to the original factory
settings (p. 150).
Touch Screen
Allows for calibration of the touch
screen (p. 151).