Roland KF-7 - Manual (Page 28)

28
Chapter 1 Performance
Chapter 1
3.
Touch the slider beneath the icons to adjust the effect selected.
Touch and slide the knob on the screen to the right for a deeper reverb, and to the
left for less.
You can also move the slider with the [-] [+] buttons and the dial.
Pressing the [-] [+] buttons simultaneously returns the slider to the initial value.
When you touch <Exit>, the reverb effect is activated, and you return to the previous
screen.
Cancelling the Effect
4.
Press the [Reverb] button, and watch the indicator light go out.
The reverb effect is eliminated.
■ Adding Three-Dimensional Breadth to the
Sounds You Play (Advanced 3D)
You can add three-dimensional breadth to the sounds you play with automatic
accompaniment (p. 46), or to internal songs or music files. With this effect, called
“Advanced 3D,” you seem to be surrounded by the sound of the performance.
fig.panel1-4
1.
Press the [Advanced 3D] button and watch the indicator light up.
The following “Advanced 3D screen” appears.
fig.d-adv3d.eps_60
2.
Touch the icon to switch the effect on or off for each individual part.
Three-dimensional breadth is added to the performance part you’ve selected.
When you touch <Exit>, the Advanced 3D effect is activated, and you return to the
previous screen.
Cancelling the Effect
3.
Press the [Advanced 3D] button and watch the indicator goes out.
The Advanced 3D effect is eliminated, and the effect is no longer applied to any of
the parts.
No effect is applied when the
slider is moved all the way to
the left. In this case, the
button’s indicator won’t light
up when you press the
[Reverb] button.
ON OFF
If all of the parts are switched
off, the [Advanced 3D]
button’s indicator won’t light
up when you press the button.