Roberts Radio DreamDock - Manual (Page 21)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
20
4. Press and release the Preset button. The display will show, for example,
'P01 Empty' if no station has been stored to that preset.
5. Use the Tuning Up or Down buttons to select the desired preset
station number under which you wish to store the station.
6. Press and hold down the Preset button until the display shows, for
example, 'P01 Saved'. The station will be stored under the chosen
preset. Repeat this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
5 5
4,6
Recalling a preset station
1. Press the On / Off control to switch on the clock radio.
2. Press and release the Mode button to select the desired waveband.
3. Press and release the Preset button. The display will show, for example,
'P01 Empty' if no station has been stored to that preset. If a preset
has been stored, then the display will show either the station name
(for DAB stations) or the frequency (for FM stations).
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press and release the Select button. Your radio will tune to the chosen
preset station stored in the preset memory.
2
3
4 4
5