Digital music operation – RCA RD1022 User Manual

Page 13

Advertising
background image

EN

Editing program

Overwriting Programmed
Tracks

1. In stop mode, press and hold MODE

to enter program mode.

2. Press MODE repeatedly to select the

program location you want to
overwrite.

3. Press SKIP BACKWARD ( ) or

SKIP FORWARD ( ) to select the
new track you want to store in the
selected program location.

4. Press MODE to confirm selection.
5. Repeat steps 2 and 3 to overwrite

additional programmed tracks.

Deleting Programmed Tracks

1. In stop mode, press and hold MODE to

enter program mode.

2. Press MODE to select the

programmed location and track to be
deleted.

3. Press and hold DSP for about 3

seconds to delete the unwanted track
from your program list.
‘ - - ‘ shows on display to indicate
successful deletion.

4. Repeat steps 2 and 3 to delete

additional tracks from the program
list.

5. To cancel editing program, press OFF /

STOP ( ) once.
The unit will return to stop mode
automatically after 30 seconds if there
is no key activation.

Digital Music Operation

16

EN

Programming Tracks

1. In stop mode, press and hold MODE

for 2 seconds to enter program mode.
The program mode icon lights on
the display.

The flashing ‘ - -’ is the track selection
and ‘P01’ is the program list position.
(If you have program in your player,
the pre-programmed track number
will be shown.

2. Press

SKIP BACKWARD ( ) or SKIP

FORWARD ( ) to select a track. The
selected track number flashes on the
display.

3. Press

MODE to confirm track selection.

4. Press

MODE again to skip to the next

programming position.

5. Repeat steps 2-4 for further selections.

6. Press

OFF / STOP ( ) to exit

programming mode.
The unit returns to stop mode
automatically after 30 seconds if there
is no key activation.

See “Play Modes” section for more
information on program playback.

Digital Music Operation

15

Note

The player enters Intro Play mode

and plays the beginning of each track

as you scroll through tracks for

programming.

Tip

20 program locations are available

on this unit.

P

- - P 0 1

S o n g I n f o

RD1028 EN 6/18/04 10:18 AM Page 26

Advertising
This manual is related to the following products: