RCA RD1022 - Manual (Page 9)

EN EN
Before You Begin
Connecting the Lyra Player
to your Computer
1. Lift the rubber cover that is covering
the USB socket on the back of the
player.
2. Insert the smaller end of the USB cable
into the socket on the unit tightly.
3. Insert the larger end of the USB cable
to the USB socket on the back of the
computer.
File Download
When the unit is connected to the
computer, “USB Connected” will be
displayed on the screen.
During transfer, “USB Transfer ...” flashes
on the display. When the transfer is
complete, the display will change to "USB
Connected". Do not unplug the USB cable
when the display is flashing.
8
Note
Refer to the “USB Driver
Installation; MusicMatch Jukebox TM
Software” instruction manual for
procedures in setting up USB drivers
and transferring files to the player
and / or the memory card.
7
Before You Begin
Using Headphones
Insert phone plug into the headphones
jack ( ) on the back of player for
listening.
Have a Blast- Just Not in Your Eardrums.
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
How to Use Your Clip Phones
(The e.clipz)
The right ear clip phone is labeled R
while the left ear clip phone is labeled L.
1. Pull the ear hook away from the ear
pad slightly. You will hear a click
sound.
2. Slide the ear hook behind the ear with
the ear pad on the front of the ear.
Rotate the clip phone so the ear pad
fits closely with the ear.
3. Lock the clip phone in place by
pushing down on the top of the ear
hook until it locks.
4. For best sound quality, make sure the
earpad fits closely with your ear.
L R
CLICK CAUTION
DO NOT INSERT EAR HOOK INTO
YOUR EAR.
RD1028 EN 6/18/04 10:18 AM Page 18