Type" (p. 33) from the menu, Dv in audio ch" (p. 33) from the menu (p. 30), Ch" (p. 33) from the menu (p. 30) – Roland VC-200HD User Manual
Page 33: P. 33
33
Menus and settings
100–162 Input Parameter (continued)
200–275 Processing Parameter
* The values enclosed in a [box] are the factory defaults.
Item
Number
Item Name
Description and Available Settings
161
In Ch1&2 NomLv
Sets the input Nominal level for AUDIO INPUT connector CH1 and CH2.
+4dBu, -2dBu, -4dBu, -10dBu: Larger numerical values indicate higher levels.
162
In Ch3&4 NomLv
Sets the input Nominal level for AUDIO INPUT connector CH3 and CH4.
+0dBu, -6dBu, -8dBu, -14dBu: Larger numerical values indicate higher levels.
170
DV In Audio Ch
Selects the channel with audio output from either the AUDIO OUTPUT connectors or HD-SDI OUT con-
nector when the DV input audio input via the i.LINK connector is 4-channel (32 kHz).
* This setting is ignored when the DV input audio is 2-channel (48 kHz).
Item
Number
Item Name
Description and Available Settings
200
Scaling Type
Sets the scaling type.
[Squeeze]: Uses the same aspect ratio as the input.
Original Image
4:3
16:9
4:3 NTSC / 480i
PAL / 576i, 1024 x 768
800 x 600, 640 x 480
→
4:3 (Letterbox)
NTSC / 480i
PAL / 576i
→
4:3 (Squeeze)
NTSC / 480i
PAL / 576i
→
16:9
1080i
720p
→
Side Panel/Let Box: Shows the entire image, with black shown in portions where there is no video image.
4:3, NTSC / 480i
PAL / 576i. 1024 x 768
800 x 600. 640 x 480
→
4:3 (Letterbox)
NTSC / 480i
PAL / 576i
→
4:3 (Squeeze)
NTSC / 480i
PAL / 576i
→
16:9
1080i
720p
→
Crop: Displays the image so as to fill the entire screen; does not show the portions extending outside.
4:3, NTSC / 480i
PAL / 576i, 1024 x 768
800 x 600, 640 x 480
→
4:3 (Letterbox)
NTSC / 480i
PAL / 576i
→
4:3 (Squeeze)
NTSC / 480i
PAL / 576i
→
16:9
1080i
720p
→