Basic operations, Lock/unlock switch, Charging the battery – RightWay GPS Navigator RW 430 User Manual

Page 17: Ac power (wall charger), Dc power (car charger)

Advertising
background image

17

BASIC OPERATIONS

LOCK/UNLOCK SWITCH

On the right side of the RW 430 Navigator is a Lock/Unlock switch. This feature is
designed to prevent the unit from accidentally being turned on or off. The RW 430 will
not turn ON when in the locked position. It must be in the unlocked position to turn on
the unit. When in the unlocked position, all buttons and the touch screen are activated.
When the unit is ON and in the locked position, all buttons and the touch screen are
deactivated but all programs will run.

CHARGING THE BATTERY

The RightWay Navigator comes ready to use with a charged battery. But at some point
in time, the internal battery will need to be re-charged. This is done through either DC
ower (car charger), or AC power (wall charger).

AC POWER (WALL CHARGER)

1.

Connect the USB plug of the adapter to the USB port of the device.

2.

Plug the adapter to an electrical outlet.

3.

Battery charging begins. The operation indicator lights red.


Note: The indicator light is green when the unit is on and the battery is fully charged.

While charging, the indicator light will be orange.

Note: The RightWay 430 can be used for navigation while the unit is recharging.

DC POWER (CAR CHARGER)

1.

Connect the USB plug of the car adapter to the USB port of the device.

2.

Plug the car adapter to the jack of the cigarette lighter.

3.

Battery charging begins. The operation indicator lights red.

Advertising