RCA MM27110 - Manual (Page 44)

42
Menus and Features
Set the VCR1 Channel
When you set the VCR1 channel, the monitor automatically tunes to the
correct input channel when you press the VCR1 button on the remote.
This is called “Autotuning.” If you don’t have a VCR1 component
connected to the monitor, skip this step.
1. From the Set VCR1 Channel menu (at right), point to the choice that
matches the way you have your VCR connected to the monitor.
2. Press OK to select it and continue.
Set the VCR2 Channel
You can set the VCR2 button on the remote to automatically tune to an
input channel as well. If you don’t have a VCR2 component connected to
the monitor, skip this step.
1. From the Set VCR2 Channel menu (at right), point to the choice that
matches the way you have your VCR connected to the monitor.
2. Press OK to select it and continue.
Set the DVD Channel
When you set the DVD channel, you’re telling the monitor what input
channel to tune to when you press the DVD button on the remote.
Indicate which input you used to connect a DVD player. If you don’t have
a DVD player connected to the monitor, skip this step.
1. From the Set DVD Channel menu (at right), point to the choice that
matches the way you have your DVD connected to the monitor.
2. Press OK to select it and continue.
Set the SAT/CABLE Channel
When you set the SAT/CABLE channel, you’re telling the monitor what
channel to tune to when you press the SAT•CABLE button on the
remote.
Indicate which input you used to connect a satellite receiver, a cable box
or a set top digital converter. If you don’t have one of these components
connected to the monitor, skip this step.
1. From the Set SAT/CABLE Channel menu (at right), point to the
choice that matches the way you have your satellite receiver, cable
box, or HD receiver connected to the monitor.
2. Press OK to select it and continue.
SET VCR1 CHANNEL
1 Not Connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
6 Video 3 Input
SET VCR2 CHANNEL
1 Not Connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
6 Video 3 Input
SET DVD CHANNEL
1 Not Connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
6 Video 3 Input
7 Component Input