Raymarine 530 - Manual (Page 39)

Chapter 2: Getting Started & Adjusting the Display 2-15
M
ovi
ng Ar
oun
d
th
e
Ch
art
Figure 2-6: Chart Boundaries
4. When no further chart detail is available, as you press the bottom of the
RANGE key, the effect depends on whether Plotter Mode is on or off as
follows:
• If Plotter Mode is Off, the chart scale remains unchanged, indicating
the smallest chart scale is displayed.
Note: If Plotter Mode is Off and the cursor is homed to the vessel (see
Using FIND SHIP on page 2-13), if the vessel moves outside an area of
available cartography, the chart will automatically re-scale to the next
range with cartography.
• If Plotter Mode is On, the scale is decreased and the message NO CHART
DATA is displayed. The vessel, waypoints, routes and tracklines are dis-
played without cartography.
The chart information is restored when you return to a chart scale for which the
information is available.
➤ To zoom outtoasmaller-scale(lessdetailed) chart, simply pressthe upperpart
of the RANGE key as many times as required.
Chart Boundary -
indicates further
detail is available inside
D4279-1
RANGE