Preparation, Installing batteries – Radio Shack CID-927 User Manual

Page 6

Advertising
background image

6

PREPARATION

INSTALLING BATTERIES

Your CID-927 requires four AAA batter-
ies (not supplied) to store and display
Caller ID records. For the best perfor-
mance, we recommend alkaline batter-
ies, available at your local RadioShack
store.

Cautions:

• Use only fresh batteries of the

required size and recommended
type.

• Do not mix old and new batteries,

different types of batteries (stan-
dard, alkaline, or rechargeable), or
rechargeable batteries of different
capacities.

Follow these steps to install batteries.

Note: When replacing the batteries, in-
stall the new ones within 2 minutes, or
the CID-927’s date and time will be lost.
(The Caller ID information, however,
stays stored in the CID-927’s memory.)

1. Use a Phillips screwdriver to remove

the screw on the battery compart-
ment cover.

2. Press in the tab on the battery com-

partment cover and lift off the cover.

3. Put the batteries in the compartment

as indicated by the polarity symbols
(+ and –) marked inside.

4. Replace the cover and secure it with

the screw.

Once you install the batteries,

12:00AM 1/01

appears.

The telephone company sends the cor-
rect time with each incoming call, so the
correct date and time are automatically
set when the CID-927 receives its first
call.

When flashes in the upper right corner
of the display or the display dims, re-
place batteries.

Cautions:

• Always remove old or weak batter-

ies. Batteries can leak chemicals
that can destroy electronic parts.

• Dispose of old batteries promptly

and properly. Do not burn or bury
them.

43-927.fm Page 6 Thursday, June 24, 1999 9:36 AM

Advertising