Maintenance – RedMax GZ4500 User Manual

Page 48

Advertising
background image

48

2. Fuel filter
(a) Using a wire hook, take out the filter from the filler

port. (F34)

(1) Fuel filter

(b) Disassemble the filter and wash with gasoline, or

replace with new one if needed.

• After removing the filter, use a pinch to hold the

end of the suction pipe.

• When assembling the filter, take care not to

allow filter fibers or dust inside the suction pipe.

4. Spark plug
Clean the electrodes with a wire brush and reset the
gap to .025in as necessary. (F35)

NGK

CMR7H

5. Sprocket
Check for cracks and for excessive wear interfenng
with the chain drive. If the wearing is found obviously,
replace it with new one. Never fit a new chain on a
worn sprocket, or a worn chain on a new sprocket.
(F36)

NOTE

F35

F34

F36

10. Maintenance

English

Advertising