Revox Re:source MK3 - Manual (Page 17)

5.1 Decoder Module 3 Re:source
16
Amplifier Setup
Using the Setup menu, you can
adapt your loudspeakers to the
optimum acoustics with the M51.
This menu is called by pressing
and holding the
Setup key for
some 2 seconds and then
pressing the Amplifier key in
the display that follows.
Now you are in the 5.1 Decoder
Setup menu.
Speaker configuration
The first page in the Amplifier
setup covers the configuration
of home cinema speakers.
Here, you can define which
speakers you have connected
and whether these are large
speakers with the full frequency
range or smaller speakers with
limited bass reproduction.
There are three options for each
speaker type that can be
selected by repeated pressing
of the corresponding softkey: