Ramsey Electronics MX10 - Manual (Page 29)

MX10 Page 29
USING THE MX10
Above shows a full installation for radio broadcasting using one of the Ramsey
micropower transmitters. The parts and pieces are as follows:
❍ MX10, our newly built mixer
❍ STC1, Stereo transmitter companion. Compression, limiting, bass,
midrange, and treble controls. Active 8th order lowpass to get rid of
interfering sounds.
❍ FM25B, the PLL stereo transmitter.
To run this setup using an audio amplifier for DJing, just remove the STC1, and
replace the FM25 with the audio amplifier of choice. To record a car tape or
make a production, remove the STC1 and replace the FM25 with another tape
deck. There are many other combinations available, and it is left to one’s
imagination. Some people use this kit to mix their home audio system’s audio
with the computer’s audio. That way they can play a disk and have gore from
DOOM blasting out of their system.
TREBLE HIGHS BASS
POWER
L R
POWER
FM-25