RocketFish RF-WHD200 - Manual (Page 2)

# Component Description
1 HDMI 4 Lights to indicate that this HDMI input is selected.
2 HDMI 3 Lights to indicate that this HDMI input is selected.
3 HDMI 2 Lights to indicate that this HDMI input is selected.
4 HDMI 1 Lights to indicate that this HDMI input is selected.
5 Power and link status indicator Blinking—Power is on and the transmitter is in sleep mode
(transmitter) or searching for the receiver.
On—The transmitter and receiver are linked.
Off—The power is off.
6 Power and link status indicator Blinking—Power is on and the receiver is in sleep mode or
(receiver) searching for the transmitter.
On—The transmitter and receiver are linked.
Off—The power is off.
# Component Description
1 DC IN jack Connect the power adapter labeled “Transmitter” to this jack.
2 Power switch Turns the unit on or off.
3 HDMI select switch Press quickly (<1 second) to switch HDMI inputs; or hold for at least
3 seconds to join a Wireless Video Area Network (WVAN). See User Guide
for more information about WVAN.
4 HDMI 1 jack Connect an HDMI source device with a high-speed HDMI cable.
5 HDMI 2 jack Connect an HDMI source device with a high-speed HDMI cable.
6 HDMI 3 jack Connect an HDMI source device with a high-speed HDMI cable.
7 HDMI 4 jack Connect an HDMI source device with a high-speed HDMI cable.
# Component Description
1 HDMI jack Connect this port to an HDMI input on the TV or projector, using a
high-speed HDMI cable.
2 DC IN jack Connect the power adapter labeled “Receiver” to this jack.
3 Power switch Turns the receiver on or off.
4 Cable routing clips Insert HDMI cable into these clips for receiver placement stability.
Features
Transmitter front/top panel Receiver front/top panel
Transmitter back panel
Receiver back and side panels
Left side
Remote control
Note: Remove the plastic film from the remote control before to using it for the first time.
Important safety instructions
• Keep these instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments or accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall not be exposed to dripping or splashing and no objects with liquids such as vases, shall be
placed on the apparatus.
For more information on using your 4-port wireless HD kit, see your online User Guide at
www.rocketfishproducts.com.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other antenna.
Canadian RF Exposure Statement
This equipment is in conformity with the IC radiation exposure limits set forth for an uncontrolled environment. This
device must be installed and used at a distance of at least 20 cm (8 in) between the antenna and the body of the user.
The transmitter should not be placed close to another antenna or another transmitter, or to function with another
antenna or another transmitter.
FCC Part 15 Class B Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
• Consult the dealer or an experienced radio/TV technician for help.
IC Class B Statement (Canada)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Cet appareil numérique de la classe B conforme á la norme NMB-003 et RSS-210 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
One-year limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
For customer service, please call 1-800-620-2790.
www.rocketfishproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2011 BBY Solutions, Inc., All Rights Reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. All other products
and brand names are trademarks of their respective owners.
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia Cruz Manca, Programa Parcial de
Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito Federal, México 05349
© 2011 Best Buy UK Distributions Limited. All rights reserved. Distributed by Best Buy Europe Distributions Limited.
1 Portal Way, London W3 6RS
ENGLISH 10-1354
RF-WHD200_10-1354_QSG_V5_EN.eps 2 3/14/2011 3:01:32 PM RF-WHD200_10-1354_QSG_V5_EN.eps 2 3/14/2011 3:01:32 PM